Hand Sink, wall mount, 16"W x 15"D x 29"H O.A., 20 gauge stainless steel construction, 14" wide x 10" front-to-back x 6" deep bowl, 8"H backsplash, splash mount faucet on 4" centers with 6" swing spout, soap & towel dispenser, stainless steel side support brackets, 1-1/2" drain with P-trap, mounting bracket included, NSF

Standard 1800 Series Underbar Sink Unit, 3-compartment, 60"W x 18-1/2"D x 34"H, stainless steel construction, 10" wide x 14" front-to-back x 10" deep compartments, 12" reinforced drainboards on left & right, 3-1/2"H backsplash, 4" O.C. splash mount faucet, stainless steel clad over galvanized steel apron on front & sides, galvanized steel rear & bottom, includes 1" drain & removable overflow standpipe, galvanized steel legs with adjustable grey plastic bullet feet, NSF

Standard 1800 Series Underbar Sink Unit, 4-compartment, 72"W x 18-1/2"D x 34"H, stainless steel construction, 10" wide x 14" front-to-back x 10" deep compartments, 12" reinforced drainboards on left & right, 3-1/2"H backsplash, 4" O.C. splash mount faucet, stainless steel clad over galvanized steel apron on front & sides, galvanized steel rear & bottom, includes 1" drain & removable overflow standpipe, galvanized steel legs with adjustable grey plastic bullet feet, NSF

E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12"deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (1) 16"W x 20" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

Sink, (1) 18"W x 18" front to back x 14"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF

Sink, (1) 18"W x 18" front to back x 14"deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF

Sink, (3) 18"W x 18" front-to-back x 14"deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF

Sink, (3) 24"W x 24" front-to-back x 14"deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (2) faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF

Sink, (3) 24"W x 24" front-to-back x 14"deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (2) faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF

E-Series Compartment Sink, (1) 16"W x 20" front-to-back x 12"deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (1) 16"W x 20" front-to-back x 12"deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12"deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12"deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (2) 16"W x 20" front-to-back x 12"deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (2) 16"W x 20" front-to-back x 12"deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (2) 18"W x 18" front-to-back x 12"deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (2) 18"W x 18" front-to-back x 12"deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (3) 16"W x 20" front-to-back x 12"deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (3) 16"W x 20" front-to-back x 12"deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (3) 16"W x 20" front-to-back x 12"deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12"deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (3) 24"W x 24" front-to-back x 14"deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (2) sets of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

E-Series Compartment Sink, (1) 18"W x 24" front-to-back x 14"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

Sink, (1) 16"W x 20" front to back x 14"deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF

Sink, (1) 18"W x 24" front to back x 14"deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF

Sink, (3) 18"W x 24" front to back x 14"deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF

Underbar Sink Unit, 4-compartment, 72"W x 21"D x 32-1/2"H, 18/304 stainless steel construction, 10" wide x 14" front-to-back x 10" deep compartments, 13" ribbed drainboards on left & right, 4"H backsplash, (2) 4" O.C. deck mount faucet (PBF-4-D-10), raised marine edge on front & sides, stainless steel apron on front & sides, includes 1-1/2" drains & overflow stand pipes (PB-OVF-BS), galvanized steel gussets, galvanized legs & side bracing, adjustable plastic bullet feet, NSF (weights are subject to additional packaging)

Standard 1800 Series Underbar Hand Sink, 12"W x 18-1/2"D OA, 4" backsplash, 10" x 14" x 7" deep bowl, 1-1/2" rear corner drain with overflow pipe, faucet, stainless steel top & front, galvanized legs, NSF